Join Us |Sign In | User Guide | Inquiry Cart


manufacturer of bricks, iberglass composite mat, molding rubber silicone, rtv rubber silicone, Printing Silicone Rubbe, Manufacturer and Supplier - China

HomeProductsCompany ProfileCertificatesNewsInquiry


This company is a Free member of AsianProducts.
If you end up wanting to buy anything from this supplier, we strongly suggest you to use our Escrow service EZ Order. This will ensure a 100% safe transaction.

Information for Buyer

  • Target Markets: Mid East,Western Europe, Eastern Europe, Eastern Asia,North America, South America,Southeast Asia, and so on
  • Business Type: Manufacturer
  • OEM Service: Yes
  • Register Time: 2015-07-29

  • (Shenzhen, China) Map
  • Phone: +86/755-89948294
  • Contact Person: Claire

Products Detail

PCB Electronic Potting Silicone (HY-215)

  • Business Information:

Product Feature:

Technical Parameters for PCB Electronic Potting Silicone
Properties index Part A Part B
Before Curing Appearence Black fluid Colorless / yellowish fluid
Viscosisty (cps) 2500±500 -
Features when operation Mixing Ratio ( By weight) 10:1
Operating Time (25C /min) 20~30
Curing time ( hr, basically cured) 3
Curing time ( hr, perfectly cured) 24
Hardness(shore A) 15+/-3
After Curing Thermal Conductivity[W( m·K)] ?0.4
Dielectric Strength( kV/mm) ?25
Dielectric permittivity(1.2MHz) 3.0~3.3
Volume resistivity(Ω·cm) ?1.0×1016
Fire Resistance 94-V1
(Pls note all data of? PCB Electronic Potting Silicone Rubber with black color above?is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).
Warm Tips for for PCB Electronic Potting Silicone
?1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
?2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
?3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
????? it does not affect the performance.
?Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
?? parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperature after
?? pouring. It comes to next process when basically cured, and it takes about 24 hours
?? for completely cured.
Further information for PCB Electronic Potting Silicone, please feel free to contact Ms Claire:
Tel: +86-0755-8921238

FacebookTwitterLinkedinAdd to my favorite Print this pageForward this page
SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. GoHomeProduct ShowroomCompany ProfileNewsInquiryRank (0)