Join Us |Sign In | User Guide | Inquiry Cart
Years

funded

silicone rubber, potting silicone sealant, coating silicone sealant, pouring silicone sealant, silicone mold, Manufacturer and Supplier - China

HomeProductsCompany ProfileCertificatesNewsInquiry

Disclaimer

This company is a Free member of AsianProducts.
If you end up wanting to buy anything from this supplier, we strongly suggest you to use our Escrow service EZ Order. This will ensure a 100% safe transaction.

Information for Buyer

  • funded
  • OEM Service: No
  • Register Time: 2016-06-06

  • (Guangzhou City, China) Map
  • Phone: +86/0769-88888312
  • Contact Person: Guangzhou Usilicone chemical material Co.,Ltd
All Categories :

Product Showroom (41 products found)

Items Per Page:
Silicone Rubbers & Products
single component sealant for solar lighting Thermal (ZS-NJ-D935W)

Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ?15(min) After the curing Tensile strength ?1.5(MPa) Elongation At Break ?150(%) Shear strength ?2.0(MPa) Hardness 35~45(Shore A) ... - Update: 2016-08-04

potting silicone sealant LED Drive power Thermal (ZS-GF-5299W)

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500~2500(cps) 1500~2500(cps) A:B 1:1 Mixed Viscosity 1500~2500(cps) Operable Time 30~120(min) (Adjustable) Curing Time 3~5(h) After The Curing Hardness ... - Update: 2016-08-04

potting silicone sealant for circuit controller (ZS-GF-5299W)

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500~2500(cps) 1500~2500(cps) A:B 1:1 Mixed Viscosity 1500~2500(cps) Operable Time 30~120(min) (Adjustable) Curing Time 3~5(h) After The Curing Hardness ... - Update: 2016-07-21

one component sealant/adhesive with good corona resistant (ZS-NJ-D935W)

Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ?15(min) After the curing Tensile strength ?1.5(MPa) Elongation At Break ?150(%) Shear strength ?2.0(MPa) Hardness 35~45(Shore A) ... - Update: 2016-07-21

silicone glue for electronic component (ZS-NJ-D935W)

Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ?15(min) After the curing Tensile strength ?1.5(MPa) Elongation At Break ?150(%) Shear strength ?2.0(MPa) Hardness 35~45(Shore A) ... - Update: 2016-07-20

Silicone Potting Compound with corona resistant (ZS-GF-5299W)

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500~2500(cps) 1500~2500(cps) A:B 1:1 Mixed Viscosity 1500~2500(cps) Operable Time 30~120(min) (Adjustable) Curing Time 3~5(h) After The Curing Hardness ... - Update: 2016-07-19

single component adhesive for LED drivers (ZS-NJ-D935W)

Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ?15(min) After the curing Tensile strength ?1.5(MPa) Elongation At Break ?150(%) Shear strength ?2.0(MPa) Hardness 35~45(Shore A) ... - Update: 2016-07-19

single component adhesive for junction box (ZS-NJ-D935W)

Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ?15(min) After the curing Tensile strength ?1.5(MPa) Elongation At Break ?150(%) Shear strength ?2.0(MPa) Hardness 35~45(Shore A) ... - Update: 2016-07-19

silicone pouring sealant for driving controller (ZS-GF-5299W)

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500~2500(cps) 1500~2500(cps) A:B 1:1 Mixed Viscosity 1500~2500(cps) Operable Time 30~120(min) (Adjustable) Curing Time 3~5(h) After The Curing Hardness ... - Update: 2016-07-18

Turning Model Silicone for construction (ZS-825)

good tear strength / non-deformation / heat resistant / anti-aging / long-lasting / high-elasticity - Update: 2016-07-18

Total 5 pages(s) 01 02 03 04 05 Next